23 Most Wanted Tial Wastegates

23 Most Wanted Tial Wastegates

 

TiAL F38 Wastegate - 1450 psi100 bar lrg blue spring Red Body
TiAL F38 Wastegate – 14.50 psi/1.00 bar (lrg. blue) spring, Red Body
TiAL F38 Wastegate – 14.50 psi/1.00 bar (lrg. blue) spring, Red Body - Tial f38 38mm wastegates are constructed from high temperature alloys for the valves and lower housings, cnc machined billet aluminum actuator housings and nitronic 60 valve guides and seats. 206 psi (0. Tial f38 38mm wastegate features, racing valve stem, wear coating is resistant to the corrosive effects of lead oxide which is present when running leaded racing fuel, stainless steel valve housing, aluminum actuator housing (anodized in silver, red, blue, purple or black), high temp alloy racing valve w/ coated stem (protects from leaded fuel), high temp nomex reinforced actuator diaphragm, stainless steel actuator springs, stainless steel valve seat, stainless steel valve bushing, stainless steel weld flanges (1/2″ thick), made in the usa what’s inside the box, f38 38mm wastegate assembly, f38 valve seat, two f38 gaskets, two tial air fittings, two mounting bolts, four flex washers please note this wastegate does not include base mounting flanges. The tial f38 wastegate spring base pressures range from 3. The base mounting flanges are available separately in 304l stainless steel or mild steel with tapped or untapped holes. These high temperature materials were selected for their unique combination of high corrosion, wear and galling resistance properties. All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. 626 to 23. The billet aluminum actuator housing is lightweight and available anodized in silver, black, red, blue or purple. Inside is a 17-7 ph stainless steel actuator spring capable of consistent pressure at elevated temperatures. 6 bar). 25 to 1.

 

TiAL 38404446mm Wastegate Spring - Large Red
TiAL 38/40/44/46mm Wastegate Spring – Large Red
TiAL 38/40/44/46mm Wastegate Spring – Large Red - The boost pressures are approximations from tial based on equal intake and exhaust manifold pressures, results will vary slightly for different applications. Please see the information below to decide which spring(s) you need for your application. In these dual spring setups the resultant pressure is equal to the sum of the individual springs. Higher pressure settings will require the use of both small and large diameter springs working together. Please notetial mv-s and mv-r wastegates require the use of springs specific to those wastegate. All tial wastegate springs are constructed from 17-7 ph stainless steel which is capable of maintaining consistent pressures up to 900 deg f (483 deg c). These tial wastegate springs are for use in tial f38, f40, f41, v44, f46, and v60 wastegates.

 

TiAL F38 Wastegate - 1015 psi070 bar lrg yellow spring Silver Body
TiAL F38 Wastegate – 10.15 psi/0.70 bar (lrg. yellow) spring, Silver Body
TiAL F38 Wastegate – 10.15 psi/0.70 bar (lrg. yellow) spring, Silver Body - 626 to 23. The base mounting flanges are available separately in 304l stainless steel or mild steel with tapped or untapped holes. Inside is a 17-7 ph stainless steel actuator spring capable of consistent pressure at elevated temperatures. 25 to 1. The billet aluminum actuator housing is lightweight and available anodized in silver, black, red, blue or purple. The tial f38 wastegate spring base pressures range from 3. 6 bar). 206 psi (0. These high temperature materials were selected for their unique combination of high corrosion, wear and galling resistance properties. All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. Tial f38 38mm wastegates are constructed from high temperature alloys for the valves and lower housings, cnc machined billet aluminum actuator housings and nitronic 60 valve guides and seats. Tial f38 38mm wastegate features, racing valve stem, wear coating is resistant to the corrosive effects of lead oxide which is present when running leaded racing fuel, stainless steel valve housing, aluminum actuator housing (anodized in silver, red, blue, purple or black), high temp alloy racing valve w/ coated stem (protects from leaded fuel), high temp nomex reinforced actuator diaphragm, stainless steel actuator springs, stainless steel valve seat, stainless steel valve bushing, stainless steel weld flanges (1/2″ thick), made in the usa what’s inside the box, f38 38mm wastegate assembly, f38 valve seat, two f38 gaskets, two tial air fittings, two mounting bolts, four flex washers please note this wastegate does not include base mounting flanges.

 

TiAL Wastegate 41mm 9 Bar 1305 psi Silver F419
TiAL Wastegate 41mm .9 Bar (13.05 psi) Silver F41.9
TiAL Wastegate 41mm .9 Bar (13.05 psi) Silver F41.9 - 25 to 1. The tial f41 wastegate spring base pressures range from 3. 626 to 23. The base mounting flanges are available separately in 304l stainless steel. 6 bar). These high temperature materials were selected for their unique combination of high corrosion, wear and galling resistance properties. 206 psi (0. Tial f41 41mm wastegates are constructed from high temperature alloys for the valves and lower housings, cnc machined billet aluminum actuator housings and nitronic 60 valve guides and seats. Tial f41 41mm wastegate features, racing valve stem, wear coating is resistant to the corrosive effects of lead oxide which is present when running leaded racing fuel, stainless steel valve housing, aluminum actuator housing (anodized in silver, red, blue, purple or black), high temp alloy racing valve w/ coated stem (protects from leaded fuel), high temp nomex reinforced actuator diaphragm, stainless steel actuator springs, stainless steel valve seat, stainless steel valve bushing, stainless steel weld flanges (3/8″ thick), made in the usa what’s inside the box, f41 41mm wastegate assembly, f41 valve seat, two tial air fittings, eight stainless steel cap screws, eight stainless steel flex washers please note this wastegate does not include base mounting flanges. All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. The billet aluminum actuator housing is lightweight and available anodized in silver, black, red, blue or purple. Inside is a 17-7 ph stainless steel actuator spring capable of consistent pressure at elevated temperatures.

 

TiAL 38404446mm Wastegate Spring - Large Blue
TiAL 38/40/44/46mm Wastegate Spring – Large Blue
TiAL 38/40/44/46mm Wastegate Spring – Large Blue - Please notetial mv-s and mv-r wastegates require the use of springs specific to those wastegate. All tial wastegate springs are constructed from 17-7 ph stainless steel which is capable of maintaining consistent pressures up to 900 deg f (483 deg c). Please see the information below to decide which spring(s) you need for your application. The boost pressures are approximations from tial based on equal intake and exhaust manifold pressures, results will vary slightly for different applications. These tial wastegate springs are for use in tial f38, f40, f41, v44, f46, and v60 wastegates. In these dual spring setups the resultant pressure is equal to the sum of the individual springs. Higher pressure settings will require the use of both small and large diameter springs working together.

 

TiAL MVR TiAL Wastegate - all springs - Blue MVR B
TiAL MVR TiAL Wastegate – all springs – Blue MVR B
TiAL MVR TiAL Wastegate – all springs – Blue MVR B - Ultra compact design fits in very tight spaces v-band inlet and outlet make install easy, flanges and clamps are in the box integrated -4 an water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. Extreme high temp casting available for motorsport applications. All stainless steel hardware. High temperature silicone nomex reinforced actuator diaphragm. Mating weld flanges are 304l color anodized aluminum actuator (silver, red, blue, purple, black). 17-7 ph stainless steel actuator spring gives consistent pressure at high temperature, resist “relaxing” at temperature to 900f (483c). Nitronic 60 stainless steel is used for the valve seat, and valve bushing. High temp nicrfe based alloy is used for valve and 347ss valve housing will offer longer product life compared to competing designs. 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. These are leak tested after installation from the factory and can be removed if not utilized.

 

TiAL Wastegate 41mm 9 Bar 1305 psi Black F419BK
TiAL Wastegate 41mm .9 Bar (13.05 psi) Black F41.9BK
TiAL Wastegate 41mm .9 Bar (13.05 psi) Black F41.9BK - Inside is a 17-7 ph stainless steel actuator spring capable of consistent pressure at elevated temperatures. The tial f41 wastegate spring base pressures range from 3. Tial f41 41mm wastegate features, racing valve stem, wear coating is resistant to the corrosive effects of lead oxide which is present when running leaded racing fuel, stainless steel valve housing, aluminum actuator housing (anodized in silver, red, blue, purple or black), high temp alloy racing valve w/ coated stem (protects from leaded fuel), high temp nomex reinforced actuator diaphragm, stainless steel actuator springs, stainless steel valve seat, stainless steel valve bushing, stainless steel weld flanges (3/8″ thick), made in the usa what’s inside the box, f41 41mm wastegate assembly, f41 valve seat, two tial air fittings, eight stainless steel cap screws, eight stainless steel flex washers please note this wastegate does not include base mounting flanges. These high temperature materials were selected for their unique combination of high corrosion, wear and galling resistance properties. 626 to 23. 206 psi (0. 25 to 1. The base mounting flanges are available separately in 304l stainless steel. Tial f41 41mm wastegates are constructed from high temperature alloys for the valves and lower housings, cnc machined billet aluminum actuator housings and nitronic 60 valve guides and seats. 6 bar). All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. The billet aluminum actuator housing is lightweight and available anodized in silver, black, red, blue or purple.

 

TiAL 38404446mm Wastegate Spring - Large Yellow
TiAL 38/40/44/46mm Wastegate Spring – Large Yellow
TiAL 38/40/44/46mm Wastegate Spring – Large Yellow - In these dual spring setups the resultant pressure is equal to the sum of the individual springs. These tial wastegate springs are for use in tial f38, f40, f41, v44, f46, and v60 wastegates. All tial wastegate springs are constructed from 17-7 ph stainless steel which is capable of maintaining consistent pressures up to 900 deg f (483 deg c). Please notetial mv-s and mv-r wastegates require the use of springs specific to those wastegate. Please see the information below to decide which spring(s) you need for your application. The boost pressures are approximations from tial based on equal intake and exhaust manifold pressures, results will vary slightly for different applications. Higher pressure settings will require the use of both small and large diameter springs working together.

 

2x Multi Layer Replacment Gaskets For TIAL 35mm 38mm Wastegates
2x Multi Layer Replacment Gaskets For TIAL 35mm & 38mm Wastegates
2x Multi Layer Replacment Gaskets For TIAL 35mm & 38mm Wastegates - High quality construction of multi layered composite for 38mm and 35mm tial wastegates.

 

TiAL F38 Wastegate Gasket fits 35mm and 38mm Valves
TiAL F38 Wastegate Gasket (fits 35mm and 38mm Valves)
TiAL F38 Wastegate Gasket (fits 35mm and 38mm Valves) - Tial 38mm and 46mm inlet and outlet gaskets are constructed from metal for a tight, lasting seal on your f38 or f46 tial wastegate.

 

TiAL F38 Wastegate - 1450 psi100 bar lrg blue spring Silver Body
TiAL F38 Wastegate – 14.50 psi/1.00 bar (lrg. blue) spring, Silver Body
TiAL F38 Wastegate – 14.50 psi/1.00 bar (lrg. blue) spring, Silver Body - These high temperature materials were selected for their unique combination of high corrosion, wear and galling resistance properties. All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. 6 bar). Tial f38 38mm wastegates are constructed from high temperature alloys for the valves and lower housings, cnc machined billet aluminum actuator housings and nitronic 60 valve guides and seats. 626 to 23. The tial f38 wastegate spring base pressures range from 3. Inside is a 17-7 ph stainless steel actuator spring capable of consistent pressure at elevated temperatures. The base mounting flanges are available separately in 304l stainless steel or mild steel with tapped or untapped holes. The billet aluminum actuator housing is lightweight and available anodized in silver, black, red, blue or purple. 206 psi (0. 25 to 1. Tial f38 38mm wastegate features, racing valve stem, wear coating is resistant to the corrosive effects of lead oxide which is present when running leaded racing fuel, stainless steel valve housing, aluminum actuator housing (anodized in silver, red, blue, purple or black), high temp alloy racing valve w/ coated stem (protects from leaded fuel), high temp nomex reinforced actuator diaphragm, stainless steel actuator springs, stainless steel valve seat, stainless steel valve bushing, stainless steel weld flanges (1/2″ thick), made in the usa what’s inside the box, f38 38mm wastegate assembly, f38 valve seat, two f38 gaskets, two tial air fittings, two mounting bolts, four flex washers please note this wastegate does not include base mounting flanges.

 

TiAL MVR TiAL Wastegate - all springs - silver MVR
TiAL MVR TiAL Wastegate – all springs – silver MVR
TiAL MVR TiAL Wastegate – all springs – silver MVR - High temp nicrfe based alloy is used for valve and 347ss valve housing will offer longer product life compared to competing designs. 17-7 ph stainless steel actuator spring gives consistent pressure at high temperature, resist “relaxing” at temperature to 900f (483c). These are leak tested after installation from the factory and can be removed if not utilized. 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. Ultra compact design fits in very tight spaces v-band inlet and outlet make install easy, flanges and clamps are in the box integrated -4 an water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. High temperature silicone nomex reinforced actuator diaphragm. Extreme high temp casting available for motorsport applications. Nitronic 60 stainless steel is used for the valve seat, and valve bushing. All stainless steel hardware. Mating weld flanges are 304l color anodized aluminum actuator (silver, red, blue, purple, black).

 

TiAL MVS 38mm Wastegate - MVS Valve Seat Inlet V - band clamp Inlet Flange Outlet V - Band Clamp Outlet Flange 2 Air Fittings
TiAL MVS 38mm Wastegate – MVS Valve Seat Inlet V – band clamp Inlet Flange Outlet V – Band Clamp Outlet Flange 2 Air Fittings
TiAL MVS 38mm Wastegate – MVS Valve Seat Inlet V – band clamp Inlet Flange Outlet V – Band Clamp Outlet Flange 2 Air Fittings - Simply use the most convenient ports and block the others off with the included port plugs. Fittings are leak tested after installation from the factory and can be removed if not utilized. 7″ high, this external wastegate can be mounted in very tight locations. The mv-s utilizes v-band connections and includes both inlet and outlet mating flanges and clamps. 3 bar) up to 24. This feature uses little coolant so there is virtually no affect on the rest of the cooling system. The stainless steel flanges feature chamfered edges and are counterbored to make welding simpler. All tial springs are constructed from 17-7 ph stainless steel for consistent pressure delivery, even at high temperatures. The mv series tial wastegates also have integrated -4 an water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions. Each valve includes all necessary springs so to run pressures from as low as 4. The tial mv-s wastegate is the most compact 38mm wastegate on the market today. Standing just 3. With two upper and three lower air ports you won’t even have to rotate the actuator to get to the air lines. This feature is not required for typical street car applications but is a great addition for several scenarios, such as road racing, low air flow in engine bay, actuator too close to exhaust components, rotary applications, etc. 66 psi (1. All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. The actuator housing is cnc machined from lightweight billet aluminum which is available color anodized for a unique appearance. 7 bar). 35 psi (0. The valve and lower housing are constructed from high temperature alloys for their unique combination of high corrosion, wear and galling resistance properties. Each wastegate also includes all mv-s actuator springs.

 

TiAL MVS 38mm Wastegate w 6 Springs - Purple Body
TiAL MVS 38mm Wastegate w/ 6 Springs – Purple Body
TiAL MVS 38mm Wastegate w/ 6 Springs – Purple Body - The tial mv-s wastegate is the most compact 38mm wastegate on the market today. 66 psi (1. Standing just 3. 35 psi (0. 7 bar). Each valve includes all necessary springs so to run pressures from as low as 4. The actuator housing is cnc machined from lightweight billet aluminum which is available color anodized for a unique appearance. The stainless steel flanges feature chamfered edges and are counterbored to make welding simpler. Each wastegate also includes all mv-s actuator springs. All tial springs are constructed from 17-7 ph stainless steel for consistent pressure delivery, even at high temperatures. This feature uses little coolant so there is virtually no affect on the rest of the cooling system. The valve and lower housing are constructed from high temperature alloys for their unique combination of high corrosion, wear and galling resistance properties. The mv series tial wastegates also have integrated -4 an water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions. The mv-s utilizes v-band connections and includes both inlet and outlet mating flanges and clamps. 7″ high, this external wastegate can be mounted in very tight locations. 3 bar) up to 24. Fittings are leak tested after installation from the factory and can be removed if not utilized. This feature is not required for typical street car applications but is a great addition for several scenarios, such as road racing, low air flow in engine bay, actuator too close to exhaust components, rotary applications, etc. All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. Simply use the most convenient ports and block the others off with the included port plugs. With two upper and three lower air ports you won’t even have to rotate the actuator to get to the air lines.

 

38mm ADJ WastegatSteel Adaptor Tial Wastegate 2 Bolt to Tial WastegateV-band
38mm ADJ. Wastegat+Steel Adaptor Tial Wastegate 2 Bolt to Tial WastegateV-band
38mm ADJ. Wastegat+Steel Adaptor Tial Wastegate 2 Bolt to Tial WastegateV-band - Adapter for tial wastegate 2bolt to wastegate v-band emusa 38mm adjustable wastegate includes hardware/gasket/flange adjustable 4/6/8/10 psi high polish finish cnc machined proven accuracy exactly same as the photos professional installer is highly recommend(no instruction included) vehicle fitment information2006-2007 mazda 5 2005-2007 mazda rx-8 2005-2007 scion tc 2005-2007 toyota corolla 2004-2006 bmw 325i 2004-2006 bmw m3 2004-2006 dodge ram 1500 2004-2006 dodge ram 2500 2005-2006 dodge ram 3500 2005-2006 honda civic 2005-2006 mazda 3 2005-2006 scion xb 2004-2005 dodge neon 2005-2005 mazda miata 2005-2005 toyota celica. 100% brand new never used or installed adaptor made of high quality steel. Application universal fits all cars and trucks.

 

Steel Adaptor fit Tial Wastegate 2Bolt to Wastegate V-band Toyota Mazda Dodge
Steel Adaptor fit Tial Wastegate 2Bolt to Wastegate V-band Toyota Mazda Dodge
Steel Adaptor fit Tial Wastegate 2Bolt to Wastegate V-band Toyota Mazda Dodge - 100% brand new never used or installed made of high quality steel. Universal fits all cars and trucks. Adapter for tial wastegate 2bolt to wastegate v-band exactly same as the photos professional installer is highly recommend(no instruction included) vehicle fitment information1980-2005 toyota celica 1980-2011 toyota corolla 1980-1995 mazda rx-7 1980-2011 honda civic 1985-1995 toyota mr2 1986-2001 acura integra 1987-2006 bmw 325i 1988-1991 honda crx 1988-2011 bmw m3 1990-2005 mazda miata 1994-2010 dodge ram 3500 1994-2010 dodge ram 2500 1994-2010 dodge ram 1500 1995-2005 dodge neon 2004-2011 scion xb 2004-2010 mazda rx-8 2004-2011 mazda 3 2005-2011 scion tc 2006-2010 mazda 5.

 

TiAL F38 Wastegate - 725 psi050 bar sm green spring Silver Body
TiAL F38 Wastegate – 7.25 psi/0.50 bar (sm. green) spring, Silver Body
TiAL F38 Wastegate – 7.25 psi/0.50 bar (sm. green) spring, Silver Body - All tial wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity. 206 psi (0. These high temperature materials were selected for their unique combination of high corrosion, wear and galling resistance properties. 6 bar). Tial f38 38mm wastegates are constructed from high temperature alloys for the valves and lower housings, cnc machined billet aluminum actuator housings and nitronic 60 valve guides and seats. Tial f38 38mm wastegate features, racing valve stem, wear coating is resistant to the corrosive effects of lead oxide which is present when running leaded racing fuel, stainless steel valve housing, aluminum actuator housing (anodized in silver, red, blue, purple or black), high temp alloy racing valve w/ coated stem (protects from leaded fuel), high temp nomex reinforced actuator diaphragm, stainless steel actuator springs, stainless steel valve seat, stainless steel valve bushing, stainless steel weld flanges (1/2″ thick), made in the usa what’s inside the box, f38 38mm wastegate assembly, f38 valve seat, two f38 gaskets, two tial air fittings, two mounting bolts, four flex washers please note this wastegate does not include base mounting flanges. Inside is a 17-7 ph stainless steel actuator spring capable of consistent pressure at elevated temperatures. 626 to 23. The billet aluminum actuator housing is lightweight and available anodized in silver, black, red, blue or purple. The base mounting flanges are available separately in 304l stainless steel or mild steel with tapped or untapped holes. The tial f38 wastegate spring base pressures range from 3. 25 to 1.

 

38mm ADJ WastegateSteel Adaptor Tial Wastegate 2Bolt to HKS Wastegate 4Bolt
38mm ADJ. Wastegate+Steel Adaptor Tial Wastegate 2Bolt to HKS Wastegate 4Bolt
38mm ADJ. Wastegate+Steel Adaptor Tial Wastegate 2Bolt to HKS Wastegate 4Bolt - 100% brand new never used or installed made of high quality steel. Universal fits all cars and trucks. Adapter for tial wastegate 2bolt to hks wastegate 4bolt 38mm adjustable wastegate includes hardware/gasket/flange adjustable 4/6/8/10 psi high polish finish cnc machined proven accuracy exactly same as the photos professional installer is highly recommend(no instruction included) vehicle fitment information1988-2011 bmw m3 1980-2011 honda civic 2004-2011 mazda 3 2005-2011 scion tc 2004-2011 scion xb 1980-2011 toyota corolla 1994-2010 dodge ram 1500 1994-2010 dodge ram 2500 1994-2010 dodge ram 3500 2006-2010 mazda 5 2004-2010 mazda rx-8 1987-2006 bmw 325i 1995-2005 dodge neon 1990-2005 mazda miata 1980-2005 toyota celica 1986-2001 acura integra 1980-1995 mazda rx-7 1985-1995 toyota mr2 1988-1991 honda crx.

 

MVS TiAL Wastegate all spring - purple MVS P
MVS TiAL Wastegate all spring – purple MVS P
MVS TiAL Wastegate all spring – purple MVS P - Mating weld flanges are 304l color anodized aluminum actuator (silver, red, blue, purple, black). 7″ tall, more compact than any other external wastegate on the market today. Tial mvs wastegate, 38mm v-band external wastegate by tial sportthe mv-s 38mm unit is much more compact than its f38 predecessor, standing only 3. 7” in height. All stainless steel hardware. V-band inlet and outlet make install easy, flanges and clamps are in the boxapplicationsuniversalwhat’s in the boxmv-s assembly mv-s valve seat inlet v-band clamp inlet flange outlet v-band clamp outlet flange 2 tial air fittings plugs for unused air ports includes all springs. Ultra compact design fits in very tight spaces, the unit stands only 3. The v-band flanges make installation pain free, the three lower & two upper air ports make connecting pressure sources and boost controllers easyfeatureshigh temp nicrfe based alloy is used for valve and 347ss valve housing will offer longer product life compared to competing designs. 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. Nitronic 60 stainless steel is used for the valve seat, and valve bushing. 17-7 ph stainless steel actuator spring gives consistent pressure at high temperature, resist “relaxing” at temperature to 900f (483c). High temperature silicone nomex reinforced actuator diaphragm.

 

TiAL 38404446mm Wastegate Spring - Small Green
TiAL 38/40/44/46mm Wastegate Spring – Small Green
TiAL 38/40/44/46mm Wastegate Spring – Small Green - Please notetial mv-s and mv-r wastegates require the use of springs specific to those wastegate. Higher pressure settings will require the use of both small and large diameter springs working together. These tial wastegate springs are for use in tial f38, f40, f41, v44, f46, and v60 wastegates. Please see the information below to decide which spring(s) you need for your application. All tial wastegate springs are constructed from 17-7 ph stainless steel which is capable of maintaining consistent pressures up to 900 deg f (483 deg c). In these dual spring setups the resultant pressure is equal to the sum of the individual springs. The boost pressures are approximations from tial based on equal intake and exhaust manifold pressures, results will vary slightly for different applications.

 

TiAL MVSMVR Wastegate Spring - Red
TiAL MVS/MVR Wastegate Spring – Red
TiAL MVS/MVR Wastegate Spring – Red - Please see the information below to decide which spring(s) you need for your application. The boost pressures are approximations from tial based on equal intake and exhaust manifold pressures, results will vary slightly for different applications. However, the blue (old color maroon) spring may be used individually with the mv-r wastegate. Tial has changed their spring colors for easier identification, black replaces grey, white replaces copper, red replaces gold, blue replaces maroon, yellow replaces beige, green replaces brown, plain remains unchanged. All tial wastegate springs are constructed from 17-7 ph stainless steel which is capable of maintaining consistent pressures up to 900 deg f (483 deg c). Please notethe blue (old color maroon) and white (old color copper) are designed to work in multi-spring applications to obtain the pressure ratings listed for the mv-s wastegate, they are not designed to be used individually with the mv-s. The plain spring is to only be used with the mv-r wastegate. Higher pressure settings will require the use of multiple springs working together. These tial wastegate springs are for use in tial mv-s and mv-r wastegates. Tial f38, f40, f41, v44, f46, and v60 wastegates require the use of springs specific to those wastegates. In these multiple spring setups the resultant pressure is equal to the sum of the individual springs.

 

TiAL Wastegate 60mm 751 bar 1090 psi Silver V60751
TiAL Wastegate 60mm .751 bar (10.90 psi) Silver V60.751
TiAL Wastegate 60mm .751 bar (10.90 psi) Silver V60.751 - 17-7 ph stainless steel actuator spring gives consistent pressure at high temperature, resist “relaxing” at temperature to 900f (483c). High temp nicrfe based alloy is used for valve and 347ss valve housing will offer longer product life compared to competing designs. Mating weld flanges are 304l color anodized aluminum actuator (silver, red, blue, purple, black). Nitronic 60 stainless steel is used for the valve seat, and valve bushing. All stainless steel hardware. High temperature silicone nomex reinforced actuator diaphragm. Race proven at le mans flows 330cfm @ 1psi differential pressure.

 

TiAL MVR 44mm Wastegate w 7 Springs - Black Body
TiAL MVR 44mm Wastegate w/ 7 Springs – Black Body
TiAL MVR 44mm Wastegate w/ 7 Springs – Black Body - Tial mvr 44mm wastegate black body.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.