22 Greatest Slip Yokes

22 Greatest Slip Yokes

 

Fastshafts Turbo 400 T400-HD 45-50RC Hardened GM 1310 Transmission Slip Yoke #ad
Fastshafts Turbo 400 T400-HD 45-50RC Hardened GM 1310 Transmission Slip Yoke
Fastshafts Turbo 400 T400-HD 45-50RC Hardened GM 1310 Transmission Slip Yoke #ad - Cap size/diameter (b) 10625 (1 1/16″) | u-joint application/style (c) 1310 width of 3219″ (3 7/32″). Brand new gm t400-hd turbo 400 hardened 1310 transmission slip yoke steel 32 spline 55″ center-to-end 45-50 rc an absolute must for falcon tranmissions, or other roller bearing tail housings. Similar to dana spicer 2-3-10431x inner spline count 31 based on 32 | 45-50rc hardened steel process. Total yoke height 6250″ | barrel length (a) 4″. Center of u-joint to end height (d) 5625″ | barrel size/diameter (e) 15″.

 

Dorman 697-517 Slip Yoke #ad
Dorman 697-517 Slip Yoke
Dorman 697-517 Slip Yoke #ad - Original equipment (oe) number 20877209. Easy to install. Manufactured to strict engineering quality standards. This part has undergone a rigorous inspection to ensure high quality. Direct replacement for a proper fit.

 

Alloy USA 11400 Slip Yoke Eliminator Kit #ad
Alloy USA 11400 Slip Yoke Eliminator Kit
Alloy USA 11400 Slip Yoke Eliminator Kit #ad - This kit is a must if you installed a 2 inches or taller suspension lift (not needed for body lifted jeeps). This reduces drive shaft angle, improves bearing & u-joint life, reduces drive line vibrations. The kit fits all np 231 transfer cases. It also has a shorter and stronger main shaft design with improved oiling. Not for use with rubicon models. The purpose of this kit is to replace the slip yoke portion of the np 231 with a fixed yoke and cv-style drive shaft assembly. Will not work with cable driven speedometers. A slip yoke eliminator kit (sye) will eliminate the need to drop your transfer case in order to avoid drive train vibrations that are caused by taller suspension lift.

 

TADD TD2-3-6081EX GM Turbo 350 TH 350  700R4 HD Transmission Slip Yoke 2-3-6081EX #ad
TADD TD2-3-6081EX GM Turbo 350, TH 350 / 700R4 HD Transmission Slip Yoke 2-3-6081EX
TADD TD2-3-6081EX GM Turbo 350, TH 350 / 700R4 HD Transmission Slip Yoke 2-3-6081EX #ad - 469″ long. This is a new 26 based on 27 spline gm slip yoke.  This popular gm transmission slip yoke is 5. If you have any questions concerning our products, please message us directly through amazon and we’ll be happy to assist you.   It uses a 1350 series (td-331) u-joint and is made to be used in race car applications. This fits the gm turbo 350 & 700r4  transmissions. ) Will void warranty.  Warranty valid under normal use only (racing, engine modification, suspension alteration ect. If you want to strenghten your driveshaft this is the slip yoke you need. This slip yoke comes with a 90 day warranty.

 

TADD TD2-3-6081LX GM 350  700R4 Transmission Slip Yoke Modified to 75 2-3-6081LX #ad
TADD TD2-3-6081LX GM 350 / 700R4 Transmission Slip Yoke Modified to 7.5″ 2-3-6081LX
TADD TD2-3-6081LX GM 350 / 700R4 Transmission Slip Yoke Modified to 7.5″ 2-3-6081LX #ad - If you have any questions concerning our products, please message us directly through amazon and we’ll be happy to assist you.   This fits the common gm 3 and 4 speed transmissions or any transmission with 27 spline output shafts. This is a new 26 (yoke) based on 27 spline(trans output) gm slip yoke.   It uses a 1310 (td-329) series u-joint and is stock on some late model applications.  this pouplar gm transmission slip yoke has been modified to 7. This long slip yoke can also compensate for extreme travel rear suspension setups or driveshaft lengths slightly shorter than useable. This slip yoke comes with a 90 day warranty.  Warranty valid under normal use only (racing, engine modification, suspension alteration ect. 5″ long. ) Will void warranty.

 

Fastshafts Turbo 350 T350-HP GM 1310 Transmission Slip Yoke #ad
Fastshafts Turbo 350 (T350-HP) GM 1310 Transmission Slip Yoke
Fastshafts Turbo 350 (T350-HP) GM 1310 Transmission Slip Yoke #ad - Brand new t350-hp 1310 turbo 350 transmission slip yoke 27 spline (26 based on 27) 4l60, 4l60e t350 stock appearing and length. Similar to dana spicer 2-3-6081x total yoke height 6125″ | barrel length (a) 3625″. U-joint application/style (c) 1310 width of 3219″ (3 7/32″) | center of u-joint to end height (d) 5500″. Fits 1963 & newer gm w/ aluminum powerglide, muncie m20 & m21 4-speeds, borg warner 3 & 4 speed manual trans t4, t5, t10, t16, t56 manual transmissions gm t200, t350, some t375, 4l60, 4l60e, 200r4, 700r4, zf 6 speeds, bop tremec, hd 3-speeds. Cap size/diameter (b) 10625 (1 1/16″) | barrel size/diameter (e) 15″.

 

Spicer 3-3-488KX Slip Yoke Assembly #ad
Spicer 3-3-488KX Slip Yoke Assembly
Spicer 3-3-488KX Slip Yoke Assembly #ad - 1350 series. Spicer genuine oe replacement.

 

Spicer 2-3-6041X Slip Yoke Assembly #ad
Spicer 2-3-6041X Slip Yoke Assembly
Spicer 2-3-6041X Slip Yoke Assembly #ad - Spicer genuine oe replacement. 1330 series.

 

TADD TD3R-3-6081X GM Turbo 350 TH350  700R4 Transmission Slip Yoke Saginaw 3R #ad
TADD TD3R-3-6081X GM Turbo 350, TH350 / 700R4 Transmission Slip Yoke, Saginaw 3R
TADD TD3R-3-6081X GM Turbo 350, TH350 / 700R4 Transmission Slip Yoke, Saginaw 3R #ad - 469″ long. ) Will void warranty. 563″ wide with 1. This slip yoke comes with a 90 day warranty. 125″ caps using inside clips and is stock on many gm model applications. This is a new 26 based on 27 spline gm slip yoke. This popular gm transmission slip yoke is 5.  Warranty valid under normal use only (racing, engine modification, suspension alteration ect. If you have any questions concerning our products, please message us directly through amazon and we’ll be happy to assist you. It uses a saginaw s44 / mechanics series u-joint (td-534) and is 3.

 

NEW SOUTHWEST SPEED 32 SPLINE DRIVESHAFT SLIP YOKE ACCEPTS 1330 SERIES U-JOINTS GM TURBO 400 T-400 TH-400 RICHMOND SUPER T-10 4 SPEED MUNCIE M21 M22 ROCKCRUSHER DOUG NASH JERICO 4L80E BORG WARNER #ad
NEW SOUTHWEST SPEED 32 SPLINE DRIVESHAFT SLIP YOKE, ACCEPTS 1330 SERIES U-JOINTS, GM TURBO 400 T-400 TH-400 RICHMOND SUPER T-10 4 SPEED MUNCIE M21 M22 ROCKCRUSHER DOUG NASH JERICO 4L80E BORG WARNER
NEW SOUTHWEST SPEED 32 SPLINE DRIVESHAFT SLIP YOKE, ACCEPTS 1330 SERIES U-JOINTS, GM TURBO 400 T-400 TH-400 RICHMOND SUPER T-10 4 SPEED MUNCIE M21 M22 ROCKCRUSHER DOUG NASH JERICO 4L80E BORG WARNER #ad - The following transmissions have 32 spline output shafts > gm t-400 > gm th-400 > richmond super t-10 4 speed > muncie m21 4 speed > muncie m22 rockcrusher 4 speed > doug nash > jerico > 4l80e > borg warner (except t-4 and t-5). Yoke features > spline length 5 7/8″ > total length 7 1/2″ (measured from the center of the u-joint to the end of the yoke). Brand new long southwest speed driveshaft slip yoke for 32 spline transmissions (sws part # 699-7678). This yoke accepts 1330 series u-joints, which have 1 1/16″ outside diameter cups and measure 3 5/8″ wide to the outside of the cups. Accepts 1330 series u-joints > 1 1/16″ u-joint cup od > 3 5/8″ u-joint width (measured outside-of-cup to outside-of-cup) > external clips.

 

Spicer 3-3-2431X Slip Yoke Assembly #ad
Spicer 3-3-2431X Slip Yoke Assembly
Spicer 3-3-2431X Slip Yoke Assembly #ad - 886″ fits gm th400, 4l80e transmissions fits 1350 series u-joint w/ 1. Transmission slip yoke 32 spline x 1. 188″ diameter caps length c/l of joint to end of spline 5. 500″ made in usa. 375″ diameter seal diameter 1.

 

Fastshafts T350-16 16 Spline GM Transmission Slip Yoke #ad
Fastshafts T350-16 16 Spline GM Transmission Slip Yoke
Fastshafts T350-16 16 Spline GM Transmission Slip Yoke #ad - Fits 1955-62 chevy corvette borg warner manual,1957-66 chevy pickup & early gm cars. Also fits early ford 16 spline transmissions. Transmission slip yoke 16 spline 6250″ center-to-end utilizes 1310 series u-joint. 16 spline 6250″ center-to-end utilizes 1310 series u-joint. 1310 series 16 spline gm transmission slip yoke.

 

Rough Country- 50-7906 Slip Yoke Eliminator #ad
Rough Country- 50-7906 Slip Yoke Eliminator
Rough Country- 50-7906 Slip Yoke Eliminator #ad - Fitment any jeep vehicle equipped with an np231 transfer case. Technical notes for use with np231 model transfer cases only designed with the most current design shaft found in the new process gear np231, introduced in 1997, jeep vehicles using the early np231 can still use this kit, providing that the needle bearings are removed from the stock drive sprockets “rubicon” models do not need a slip yoke eliminator kit requires cv rear drive shaft. Kit contents slip yoke eliminator kit. Benefits converts transfer case from slip yoke to a fixed yoke for improved off-road durability and performance. Item specifics weight 153-lbs.

 

Spicer 2-3-4871X Slip Yoke Assembly #ad
Spicer 2-3-4871X Slip Yoke Assembly
Spicer 2-3-4871X Slip Yoke Assembly #ad - 220″ diameter seal diameter 1. 062″ diameter caps length c/l of joint to end of spline 6. 500″ fits ford aod, c4, t5 transmissions fits 1310 series u-joint w/ 1. Transmission slip yoke 28 spline x 1. 000″ made in usa.

 

Rugged Ridge 1867660 Transfer Case Slip-Yoke Eliminator Kit #ad
Rugged Ridge 18676.60 Transfer Case Slip-Yoke Eliminator Kit
Rugged Ridge 18676.60 Transfer Case Slip-Yoke Eliminator Kit #ad - Shortens output shaft 3 inches. Slip yoke. Limited 5 year warranty. Reduces drive line angle. Steel.

 

Jeep 231 J Heavy Duty Slip Yoke Eliminator Kit  SYE Kit #ad
Jeep 231 J Heavy Duty Slip Yoke Eliminator Kit / SYE Kit
Jeep 231 J Heavy Duty Slip Yoke Eliminator Kit / SYE Kit #ad - 30 (inside yoke) based on 31 (trans output) spline. Spicer 1330 series u-joint (td-354). Heavy duty slip yoke eliminator (sye) kit designed for all 231 jeep transfer cases includes 32 spline hd main shaft, 1310 spicer style cv yoke and detailed instructions lifetime warranty against breakage part number 52231. Slip yoke fits the ford c-6 / t45 & tremec transmission.

 

Spicer 3-3-4281X Slip Yoke Assembly #ad
Spicer 3-3-4281X Slip Yoke Assembly
Spicer 3-3-4281X Slip Yoke Assembly #ad - 1350 series. Spicer genuine oe replacement.

 

TADD TD3-3-5431X FORD BW1356 Transfer Case Slip Yoke 3-3-5431X #ad
TADD TD3-3-5431X FORD BW1356 Transfer Case Slip Yoke 3-3-5431X
TADD TD3-3-5431X FORD BW1356 Transfer Case Slip Yoke 3-3-5431X #ad - Please double check the diagram and specifications in pictures above. Before ordering please verify the seal diameter (od of the yoke) which is 1. 885″ is correct for your application. 62 width) series u-joint (td331) and has been used on applications since 1989. This slip yoke fits the ford e4od and 4r100 transmission and most transfer case application.  Warranty valid under normal use only (racing, engine modification, suspension alteration ect.  This popular ford transmission and transfer case slip yoke is 7. ) Will void warranty. 18 cap dia x 3. 312″ long.  It uses a 1350 (1. This slip yoke comes with a 90 day warranty. This is a new 30(in yoke) based on 31(output) spline ford slip yoke. If you have any questions concerning our products, please message us directly through amazon and we’ll be happy to assist you.

 

APDTY 708613 Rear Driveshaft Front Slip Yoke Seal Stops Clunk On 1992-2005 Silverado Sierra or K1500 Pickup 4-Wheel Drive Solves Clunk Bump Sound Used on TSB 01-04-17-004 Replaces GM 12477702 #ad
APDTY 708613 Rear Driveshaft Front Slip Yoke & Seal Stops Clunk On 1992-2005 Silverado Sierra or K1500 Pickup 4-Wheel Drive (Solves Clunk Bump Sound; Used on TSB 01-04-17-004; Replaces GM 12477702)
APDTY 708613 Rear Driveshaft Front Slip Yoke & Seal Stops Clunk On 1992-2005 Silverado Sierra or K1500 Pickup 4-Wheel Drive (Solves Clunk Bump Sound; Used on TSB 01-04-17-004; Replaces GM 12477702) #ad - Universal u-joint sold seperatley most models use acdelco 45u0106. Includes new seal. Upgraded nickel plated design (alternative to gm 12477702). Eliminates the common clunk clank or bang sound when stopping & taking off. Used to repair tsb 01-04-17-004 & 01-04-17-004a.

 

Precision Shaft Technologies 100001 SLIP YOKE 55IN 27 #ad
Precision Shaft Technologies 100001 SLIP YOKE 5.5IN 27
Precision Shaft Technologies 100001 SLIP YOKE 5.5IN 27 #ad - Slip yoke27 spline5. 500 in longsteelnatural1310 u-jointmuncie/powerglide/super t10/th350/t56/4l60eeach.

 

GM Transmission Front Driveshaft Slip Yoke 27-Spline 8 Inch #ad
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 8 Inch
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 8 Inch #ad - Muncie m20 & /m21, saginaw, borg warner t-5, t-10 & t-56 27 spline manual transmission. Powerglide, t-350, 700r, 200r and 4l60 transmission slip yoke. Fits the common gm 3 & 4 speed transmissions with a 1 3/16″ x 27 splined output shafts.

 

TADD TD3-3-5551X GM Turbo 400 TH 400  4L80E Transmission TC Slip Yoke 3-3-5551X #ad
TADD TD3-3-5551X GM Turbo 400, TH 400 / 4L80E Transmission & T/C Slip Yoke 3-3-5551X
TADD TD3-3-5551X GM Turbo 400, TH 400 / 4L80E Transmission & T/C Slip Yoke 3-3-5551X #ad - ) will void warranty. If you have any questions concerning our products, please message us directly through amazon and we’ll be happy to assist you. 188 caps-3.  Warranty valid under normal use only (racing, engine modification, suspension alteration ect.  The u-joint is a spicer series 1350 (td331) with outside clips (1. This is a new 31(in yoke) based on 32 spline(output shaft) gm slip yoke. 94″ long and used on long tail housing transmissions. This slip yoke comes with a 90 day warranty. 622 width) and is stock on many applications.  This popular gm transmission slip yoke and transfer case slip yoke is 7.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.