K&N Performance Cold Air Intake Kit 69-4523TP with Lifetime Filter for Chevrolet Camaro 3.6L V6 - Replaces stock air intake system. Lasts up to 100,000 miles before service is required (depending on driving conditions). Estimated horsepower gain of 1563 hp at 5800 rpm. Designed to improve throttle response and engine sound. Easy to install, usually in 90 minutes or less.
AEM 21-744C Cold Air Intake System - The air intake system is easy to install with commonly available tools and it is backed by aem’s lifetime limited warranty. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was designed, tuned and dyno-tested to fit specific chevrolet cruze models. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Some aem air intakes are not legal for sale or use in california and other states adopting california emission standards, while others are 50 state legal. Air enters the system through an oversized aem dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The tapered cylinder shaped aem dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air sensor. The aem 21-744c performance cold air intake system produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. View the 21-744c vehicle applications to determine the legal status for each vehicle.
TIROL Air Filter Round Tapered Universal Auto Cold Air Intake Adjustable Neck 3″-3.5″-4″ Blue - More filtering surface than original filter. Exceptional airflow. Improves fuel economy, low energy consumption. With a clamp and 3 kinds size neck, works with 76mm, 88mm & 100mm air intake systems. Increases horsepower increase the intake flow, making the car more powerful. Filter can be washed & oiled.
88-95 Chevy Silverado TBI C/K / 88-91 Chevy Silverado 5.0/5.7L / 92-95 Chevy Silverado V8 5.7L Cold Air Intake – Chrome + Filter(1988 1989 1990 1991 1992 1993 1994 1995 89 90 91 92 93 94) - Made of high quality aluminum piping comes with washable filter. This is a 1 bolt will not fit 2 bolt chevy( if your truck is 2 bolt do not order will not allow return if your still order). Easy to install, no modifications needed installation manual not included. Replaces your existing stock rubber intake pipes. Filter, holes, brackets and cupping may vary in color (filter design may also vary).
Spec-D Tuning AFC-ACD94RD-AY Honda Accord DX LX EX SE L4 4Cyl Cold Air Intake+Red Filter - 30 day money back guarantee & 90 days limited warranty. 1 set cold air intake with red filter. Increase horsepower, torque and improve the gas mileage. Kit includes aluminum intake pipes, rubber base air filter, vacuum hoses, reducers and all necessary mounting hardware. Made by oem approved & iso certified manufacturers in materials that meet or exceed strict oem requirements.
S&B Filters 75-5085 Cold Air Intake for 2017 Ford Powerstroke 6.7L (Cleanable Filter) - Using the included silicone box plug will seal the airbag making the front facing primary inlet scoop the main source of airflow. 7 can be completed in 90 minutes or less with standard tools following our highly regarded installation instructions. Injection molded maf sensor plate in conjunction with a foam maf sensor gasket, our injection molded maf sensor plate ensures a quality seal around the maf sensor that ensures a true oe o-ring seal and prevents air leaks. More airflow. The 75-5085 has two airflow configurations depending on your needs. In addition, our intake tube has minimal bends as it connects to the turbo inlet. Less restrictive than stock we swapped the location of the intake box and battery, allowing our intake to not only be closer to but also directly in line with the front air inlet. Quick and easy to install despite having to relocate the battery, our new intake kit for the 2017 powerstroke 6. These details result in a significant decrease in restriction compared to stock intake. Better performance.
AF Dynamic Cold Air Filter intake Systems for Dodge Ram 1500 09-16 5.7L V8 W/ Heat Shield 0915-DR-HS - For 2009-2016 ram 1500/2500 pickup 57l v8. 60 days factory warranty. Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output improves up to 95% filtration efficiency over oem paper filters increases of 5 to 10 horsepower, 6 to 8 precent of torque, and improved gas mileage of your vehicle intense deep sporty sound professional installation is highly reccomended. Uses only high quality silicone coupler, elbow and hoses “not cheap rubber” works with original equipment manufacturer computer systems. Replaces oem filter and air box with 1az4000% new quality parts uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps.
S&B 75-5027 Cold Air Intake Kit Ford Powerstroke F-250 F-350 (Cleanable, 8-ply Cotton Filter) - Comes with an s&b high performance cleanable 8-ply filter with 1″ pleats for great power and mileage note s&b’s cleanable filters only allow for the use of the precision ii cleaning and oiling kit to clean and oil your filter. 9941% efficient @ 651 cfm (iso course dust). Made in usa and tested to the standards most other performance filter companies don’t — iso 5011. Flows 422% better than the stock intake.
Mopar 77070052 Cold Air Intake - Carb-approved e. Kits include all mounting hardware and a washable/reusable filter. #D-265-22. They provide noticeable horsepower and torque gains under varying atmospheric conditions. 6l pentastar v6 gasoline engine cold air intake systems, jeep heat up your engine with a steady flow of cold air these bolt-on systems are designed to allow cooler outside air through a directional cone filter, directly into the intake manifold. O. New in package genuine oem mopar cold air intake system part # 77070052 fits 2011 to 2013 jeep wrangler jk 2 or 4 door models equipped with 3. Do not oil dry media filters.
K&N Performance Cold Air Intake Kit 57-3050 with Lifetime Filter for 2005-2007 Chevrolet/GMC Classic Trucks and SUVs 4.8L/5.3L/6.0L V8 - Lasts up to 100,000 miles before service is required (depending on driving conditions). Designed to improve throttle response and engine sound. Replaces entire factory air intake system. Estimated horsepower gain of 1193 hp at 5367 rpm. Easy to install, usually in 90 minutes or less.
K&N Performance Cold Air Intake Kit 63-9025 with Lifetime Filter for 2005-2011 Toyota Tacoma 4.0L V6 - Designed to improve throttle response and engine sound. Easy to install, usually in 90 minutes or less. Not legal for highway use in states adopting california emission regulations. Replaces entire factory air intake system. Estimated horsepower gain of 1031 hp at 4979 rpm.
S&B Filters 75-5104D Cold Air Intake for 2011-2016 Ford Powerstroke 6.7L (Dry Extendable Filter) - All new airbox design completely redesigned for an amazing increase in airflow and fast and easy to install. 7 takes advantage of our latest materials and design that flows better and protects your engine. Better fit and finish fast and easy to install, our upgraded kit for 2011-2016 ford powerstroke 6. Using the included silicone box plug will seal the airbag making the front inlet the primary source of air. Innovative fitment the intake tube runs through the silicone tube seal on the airbag that compensates for engine movement, while still providing an effective seal against engine heat. The large air filter can easily be installed and removed without having to take out the intake tube. Added engine protection an added auxiliary inlet features a foam piece to help protect your engine in the event the main inlet becomes blocked. Two airflow configurations the 75-5104d has two airflow configurations depending on your needs.
Shor Ram Black Cold Air Intake Kit w/ Steel Heat Shield Black Filter fits GMC Chevrolet Increase Horsepower - Includes a washable & reuseable upower air filter. Easy to install without any additional parts after you purchased this upower cold air intake kit(professional installation is highly recommended (no instruction included)). Powder coated steel heat shield to isolate air filter from the rest of the engine compartment. Polished free-flowing aluminum cold air intake tube. The air intake kit is designed to increasing 8-10% horsepower & 6-10% torque, and creating an attractive intake noise.
K&N Performance Cold Air Intake Kit 63-2592 with Lifetime Filter for Ford F150 3.5L Turbo Ecoboost - The tools needed are a screwdriver and an allen wrench. This allows your engine to inhale a larger amount of air than the factory air filter assembly. The tube accommodates the factory air temperature sensor. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body and turbo inlet for a guaranteed power gain. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. More air means more usable power and acceleration throughout the engine’s rpm range. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. The air intake comes with a chrome topped k&n high-flow air filter and a heat shield that installs into the original air box space. The k&n 63-2592 air charger air intake system replaces the restrictive factory air filter and air intake housing on specific ford f150 ecoboost models. K&n air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow.
S&B Filters 75-5016 Cold Air Intake Kit for 2005-2008 Ford F150 V8 5.4L (Cleanable Filter) - Flows 352% better than the stock intake. Made in usa and tested to the standards most other performance filter companies don’t — iso 5011. 9940% efficient @ 381 cfm (iso course dust). Comes with an s&b high performance cleanable 8-ply filter with deeper pleats for great power and mileage note s&b’s cleanable filters only allow for the use of the precision ii cleaning and oiling kit to clean and oil your filter.
True Blue Cold Air Return Filter Pad, 10×30 - It lasts up to 30 days and measures 10-inches by 30-inches. Cut-to-fit design, attaches easily to the back of your cold air return vent. The true blue cold air return filter pad has electrostatically charged filter material that captures sub-micron airborne allergens like dust, dirt, pollen, pet dander and smoke. The electrostatic filter material attracts very small particles much the same way magnets attract metal. It is designed to fit your cold air return vent and filter dust and dirt particles before entering the furnace or air conditioning duct system.
K&N Performance Cold Air Intake Kit 71-2591 with Lifetime Filter for Ford F150 5.0L V8 - This item is not for sale in the state of california/non-carb compliant. Guaranteed to increase horsepower. Lasts up to 100,000 miles before service is required (depending on driving conditions). Designed to improve throttle response and engine sound. Made from all black components. Washable and reusable air filter.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.